EN Sole Flexing Tester

Application

This EN Sole Flexing Tester is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.

Standards

SATRA TM161, ISO 17707, ISO20344-2021,

ISO20347 section 5.8.4, AS/NZS 2210.2

GB/T 20991 section8.4.2, QB/T 2885, DIN 53543

Feature

Plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.

Key Specifications of the Sole Flexing Tester

• Test Positions: 3 or 6
• Control Mode: Touch screen controlled
• Bending Angle: 90±2°
• Bending Speed: 125–150cpm
• Mandrel Diameter: 30 mm
• Clamps Apart: 110±1mm
• Movable Fixture Stroke: 41.5±0.5 mm
• Counting: 0–9999999
• Power Supply: 1∮ AC 220V 50/60Hz
• Dimensions: 105 x 42 x 60 cm (3 positions), 105 x 60 x 60 cm (6 positions)
• Weight: Approx. 90kg (3 positions), 160kg (6 positions)

Why Choose the EN Sole Flexing Tester?

The EN Sole Flexing Tester ensures accurate sole flexing resistance testing with its adjustable speed and touch-screen interface. Its compliance with international standards like ISO 17707 and durable design make it a top choice for footwear manufacturers.