Tension Meter PT-100 & PT-100-L

Description

Universal Tension Meter PT Series

Cone-shaped guide rollers allow easy threading of the material, and you can turn the instrument by 180° during use.
The device automatically sets zero, regardless of the measuring position.
You can use the tension meter with either your right or left hand.
You can adjust the electronic damping to achieve steady tension readings.
You can switch the measuring units between cN and g.
A LiPo accumulator powers the device.

MODEL	Measuring Range Tension cN	Measuring Range Speed* m/min	Measuring Range Length* m	Measuring Head Width** mm	SCHMIDT Calibration Material***
PT-100	0.5 – 100.0	–	–	24	PA: 0.20 mm Ø
PT-100-L	0.5 – 100.0	0 – 1999	0 – 1999	24	PA: 0.20 mm Ø

Calibration:	According to SCHMIDT factory procedure
Accuracy:	± 1.5 % FS and ± 1 digit*
(not length and speed measurement)
Overrange (approx.):	10 % FS, without accuracy guarantee*
Overload protection:	200 %
Measuring principle:	Strain gauge bridge
Measuring units:	cN, g switchable
m, in, m/min, in/min (only PT-100-L)
Display update rate:	2 times / sec
Damping:	Selectable electronic damping
(moving averaging)
Display:	LCD 3 ½ digits, 9 mm high
Temperature range:	10 – 45 ºC
Air humidity:	5 % RH, max.
Power supply:	LiPo accumulator (~ 40 h continuous use,
charging time 3½ h) and AC adapter
100 – 240 V with adapters (EU/USA/UK)
Auto power off:	Automatically after 3 minutes
of non use
Housing material:	Aluminium
Housing dimensions:	141 x 36 x 22 mm (L x W x H)
Weight, net (gross):	Approx. 170 g (500 g)